Quick Lookups: Fluids

2024 Volvo XC90 T8 Recharge CoreSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil T8 Recharge Core,T8 Recharge Plus,T8 Recharge Ultimate 4.06 OZS. 0.12 L PAG SP-A2 Approximate capacity. S
Air Cond Refrigerant N/A N/A R-1234yf For further details see "Air conditioner specification label". S
Automatic Transmission Fluid T8 Recharge Core,T8 Recharge Plus,T8 Recharge Ultimate N/A N/A Transmission Fluid AW-1 The Transmission Oil DOES NOT normally need to be changed during the service life of the vehicle. However, it may be necessary to replace the oil if the vehicle is often driven in areas of sustained temperature extremes (hot or cold), when towing a trailer over long distances, prolonged driving in mountainous areas, or if the vehicle is often driven short distances in temperatures under 40Deg F. (5Deg. C). Different types of oil should never be mixed. S
Brake Fluid N/A N/A VOLVO Original or similar fluid that meets a combination of DOT 4, 5.1 and ISO 4925 class 6. S
Engine Coolant N/A N/A 50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water The level should not exceed the yellow MAX mark inside the expansion tank. S
Engine Oil T8 Recharge Core,T8 Recharge Plus,T8 Recharge Ultimate w/Filter 5.90 QTS. 5.58 L VCC RBSO-2AE 0W-20 This vehicle is delivered from the factory with synthetic oil. S
Windshield Washer Fluid N/A N/A Reservoir should be filled with water and solvent (winter time: windshield washer antifreeze). S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.