Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Infotainment Control Module (ICM)
The customer can personalize some of the central locking settings using the infotainment control module (ICM) (3/281). The infotainment control module (ICM) communicates with the central electronic module (CEM) via the low speed side of the CAN network. The central locking settings are presented via a menu system in the display on the infotainment control module (ICM). For further information about the settings which can be made, see: DIAGNOSTIC FUNCTIONS
The central locking settings are stored in the central electronic module (CEM) and are transmitted to the infotainment control module (ICM) when the ignition is switched on.
For further information, see appropriate Design and Function information for the infotainment control module (ICM).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.