Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Overview: Signals
The table below summarizes the input and output signals to and from the Television Module (TVM). Signal type is divided into directly connected signals, MOST communication and indirectly connected signals, CAN and LIN communication. The image below shows the same information, as well as Volvo's component designation.
| Input signals | Output signals |
| Directly connected: | Directly connected: |
|
|
| LIN communication (Via ICM): | |
|
|
| CAN communication (Via ICM): | |
|
|
| Via MOST communication: | Via MOST communication: |
|
|
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.