Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Left-Hand Keypad
The left-hand keypad unit is on the left-hand side of the infotainment control module. The keypad is connected via a cable directly to the printed circuit board. The keypad unit has the following buttons:
- ON/OFF button
- buttons for direct access to the CD player and radio
- buttons for searching on the CD player and radio
- numeric buttons for the carphone, CD selection and preprogrammed radio stations
- a knob for the volume control
- an infrared receiver for remote control.
The buttons are connected in button circuits. When a button is pressed the circuit closes. The infotainment control module determines which button is pressed by the voltage level of the input signal from the circuit. The table below outlines which buttons are in the different circuits.
| Button circuit | Button | |||
| Button circuit 1 | ||||
| Button circuit 2 | ||||
| Button circuit 3 | ||||
| Button circuit 4 | ||||
| Power button | ||||
There are diagnostics for the left-hand keypad.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.