Remote Controls

2011 Volvo XC90 Base, FWDSECTION Remote Controls
Fig 1: Identifying Remote Controls
GLL102108Courtesy of VOLVO CARS CORPORATION

There are two different remote controls for the infotainment system. One is used for audio, radio and TV remote control. The other is used for remote control of the navigation system. The remote controls can be used to activate most of the functions which can be controlled via the keypad units on the infotainment control module (ICM) and via the buttons on the steering wheel.

The remote controls transmit infrared signals to the receiver unit which is in the left-hand keypad on the infotainment control module (ICM). The signals then go via the directly connected cable to the printed circuit board which controls the selected function.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.