Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2011C30 R-DESIGN, AUTOMATICREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSDRIVER DOOR MODULE AND PASSENGER DOOR MODULE DIAGNOSTIC TROUBLE CODES
2011 Volvo C30 R-Design, Automatic
Driver Door Module And Passenger Door Module Diagnostic Trouble Codes
2011 Volvo C30 R-Design, AutomaticSECTION Driver Door Module And Passenger Door Module Diagnostic Trouble Codes
- DDM/PDM-0002 Central Locking Button. Stuck In The Active Position
- DDM/PDM-0003 Central Locking Button, Unlocking. Stuck In The Active Position
- DDM/PDM-0010 Control Panel. Open-Circuit
- DDM/PDM-1000 Control Module. Internal Fault
- DDM/PDM-6C02 Central Locking Motor M1. Stuck In The Active Position
- DDM/PDM-6C03 Central Locking Motor M1. Stuck In The Inactive Position
- DDM/PDM-6C05 Central Locking Motor M2. Stuck In The Active Position
- DDM/PDM-6C06 Central Locking Motor M2. Stuck In The Inactive Position
- DDM/PDM-6C08 Central Locking Motor M3. Stuck In The Active Position
- DDM/PDM-6C09 Central Locking Motor M3. Stuck In The Inactive Position
- DDM/PDM-6D01 Power Window Mechanism. Internal Fault
- DDM/PDM-6D02 Power Window Up Relay. Stuck In The Active Position
- DDM/PDM-6D03 Power Window Up Relay. Stuck In The Inactive Position
- DDM/PDM-6D04 Power Window Down Relay. Stuck In The Active Position
- DDM/PDM-6D05 Power Window Down Relay. Stuck In The Inactive Position
- DDM/PDM-6D0C Control Module. Internal Fault
- DDM/PDM-6D0D Control Module. Internal Fault
- DDM/PDM-6E0A Mirror Motor. Short-Circuit To Supply Voltage
- DDM/PDM-6E0B Mirror Motor. Short-Circuit To Ground
- DDM/PDM-6E0C Mirror Motor. Open-Circuit
- DDM/PDM-6E41 Position Sensor, Mirror. Short-Circuit To Supply Voltage/Open-Circuit
- DDM/PDM-6E42 Position Sensor, Mirror. Short-Circuit To Ground
- DDM/PDM-6E43 Position Sensor, Mirror. Short-Circuit To Supply Voltage/Open-Circuit
- DDM/PDM-6E44 Position Sensor, Mirror. Short-Circuit To Ground
- DDM/PDM-6E45 Power Supply. Open-Circuit
- DDM/PDM-8010 Mirror Lamp. Short-Circuit To Supply Voltage
- DDM/PDM-8011 Mirror Lamp. Short-Circuit To Ground
- DDM/PDM-8012 Mirror Lamp. Open-Circuit
- DDM/PDM-E003 Configuration Fault. Faulty Communication
- DDM/PDM-E010 Control Module. Internal Fault
- DDM-0012: Control, Driver's Window. Stuck In The Active Position
- DDM-0013: Control, Passenger Window. Stuck In The Active Position
- DDM-0020: Control, Door Mirror. Stuck In The Active Position
- DDM-0022: Control, Door Mirror Selector. Stuck In The Active Position
- DDM-0024: Central Locking Switch. Faulty Signal
- DDM-0025: Led, Camera Module Signal Too Low
- DDM-0026: Led, Camera Module Signal Too High
- DDM-0027: Led, Camera Module Open Circuit
- DDM-002B: Camera Module Internal Failure
- DDM-002F: Camera Module Voltage Supply Signal Too Low
- DDM-003A: Camera Module Voltage Supply Signal Too High
- DDM-6E01: Mirror Motor. Shorted To Supply
- DDM-6E02: Mirror Motor. Ground (GND) Short
- DDM-6E03: Mirror Motor. Open Circuit
- DDM-6E04: Mirror Motor. Shorted To Supply
- DDM-6E05: Mirror Motor. Ground (GND) Short
- DDM-6E06: Mirror Motor. Open Circuit
- DDM-6E07: Mirror Motor. Shorted To Supply
- DDM-6E08: Mirror Motor. Ground (GND) Short
- DDM-6E09: Mirror Motor. Open Circuit
- DDM-8002: Mirror Heater. Ground (GND) Short
- DDM-8003: Mirror Heater. Shorted To Supply
- DDM-8021: Side Turn Indicator. Ground (GND) Short
- DDM-8022: Side Turn Indicator. Open Circuit
- DDM-Dd11: Communication With Switch Pack Internal Fault
- DDM-Dd20: Lin Communication Camera Module Internal Fault
- DDM-Dd21: Lin Communication Camera Module Shorted
- DDM-Dd22: Lin Communication Camera Module Internal Fault
- DDM-Dd30: Communication With Camera Module Internal Fault
- DDM-E001: Control Module Communication. Faulty Communication
- DDM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version
- PDM-0012: Control, Passenger Window. Stuck In The Active Position
- PDM-0024: Central Locking Switch. Faulty Signal
- PDM-0025: Led, Camera Module Signal Too Low
- PDM-0026: Led, Camera Module Signal Too High
- PDM-0027: Led, Camera Module Open Circuit
- PDM-002B: Camera Module Internal Failure
- PDM-002F: Camera Module Voltage Supply Signal Too Low
- PDM-003A: Camera Module Voltage Supply Signal Too High
- PDM-Dd20: Lin Communication Camera Module Internal Fault
- PDM-Dd21: Lin Communication Camera Module Shorted
- PDM-Dd22: Lin Communication Camera Module Internal Fault
- PDM-Dd30: Communication With Camera Module Internal Fault
- PDM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.