Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2010XC70 AWD L6-3.2L VIN 96 B6324S2REPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONU CODE CHARTSU3000U300063 (FORWARD SENSING MODULE - FSM)DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION
2010 Volvo XC70 AWD L6-3.2L VIN 96 B6324S2
Diagnostic Trouble Code (DTC) Information
2010 Volvo XC70 AWD L6-3.2L VIN 96 B6324S2SECTION Diagnostic Trouble Code (DTC) Information
Diagnostic trouble code (DTC) information FSM-U300063
Condition
Forward Sensing Module (FSM) checks internal components and functions in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Internal signals outside permitted range occur for more than 3 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Engine running.
Substitute value
- None.
Possible source
- Internal fault in the Forward Sensing Module (FSM).
Fault symptom[s]
- Brake pedal/Excessive "brake pedal effort" required
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Warning lights and chimes/Bulb failure indication/no indication
- Text window and warning symbol/Text message
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.