Troubleshooting Information

2010 Volvo XC70 AWD L6-3.2L VIN 96 B6324S2SECTION Troubleshooting Information





Troubleshooting information

Information
No troubleshooting has been developed for this diagnostic trouble code (DTC). Diagnostic trouble code (DTC) for this malfunction is first stored in the brake control module (BCM), then in the engine control module (ECM). This diagnostic trouble code (DTC) cannot be erased before the diagnostic trouble code (DTC) in the brake control module (BCM) has been erased and remedied.
Therefore, first read off the diagnostic trouble codes in the brake control module (BCM), perform troubleshooting and take appropriate action. Then this diagnostic trouble code can be erased. For further information on this diagnostic trouble code, select Information, then Diagnostic trouble code information.

Continue - DONE

-------------------------------------------------

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.