2009 Volvo XC90 R-Design, AWDFACTORY OEM SERVICE PROCEDURE

Programming Procedures

The following can be programmed in the Central electronic module (CEM) according to customer's wishes.

Programming 

  1. Seat temperature.

    Refer to PROGRAMMING THE SEAT TEMPERATURE (CENTRAL ELECTRONIC MODULE) 

  2. Approach lights.

    Refer to PROGRAMMING THE HOME SAFE LIGHTS 

  3. Daytime running lights.

    Refer to PROGRAMMING DAYTIME RUNNING LAMPS 

  4. Tailgate window wiper (5 DRS).

    Refer to PROGRAMMING THE WIPER FUNCTION FOR THE REAR WINDSHIELD (5 DOOR MODELS) 

Do you want to program any more parameters? 

Do you want to program any more parameters? 

Do you want to program any more parameters? 

Do you want to program any more parameters? 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.