Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2009XC90 BASE, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTHEADLIGHTSELECTRICAL - SYMPTOM RELATED DIAGNOSTIC PROCEDURES - 1 OF 2CHECKING REMOTE CONTROLS (2003-2014)CHECKING THE REMOTE CONTROLINTERIOR LIGHTING AND UPPER ELECTRONIC MODULE (UEM), REPLACINGREPLACING THE LENS AND THE BULB
2009 Volvo XC90 Base, AWD
Replacing The Lens And The Bulb
2009 Volvo XC90 Base, AWDSECTION Replacing The Lens And The Bulb
Removal
- Fold down the cover as shown.
- Press the catches outwards. Remove the lens.
- Remove the bulb. Use a weatherstrip tool or similar.
Installation
- Install the bulb.
- Press the lens into place.
- Press the cover into place.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.