Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Programming The Seat Temperature (Central Electronic Module): Notes
The heated seat temperature can be adjusted.
This can be carried out for both the left and right seats.
There are two values that can be programmed: low temperature and high temperature.
Programming must be carried out so that the high temperature setting is higher than the low temperature setting.
Do you want to program in Celsius or Fahrenheit?
- Celsius. Refer to CELSIUS .
- Fahrenheit. Refer to FAHRENHEIT
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.