Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Switch For Load Assistance
The switch for load assistance is located on the right-hand side on the sill in the cargo compartment and is directly connected to the Convertible Roof Module (CRM). The switch controls a function called load assistance.
For operation, press the switch:
- once to activate movement
- once more to stop (if the limit position has not already been reached)
- a final time to reset the roof sections.
Operation is automatic and the switch must not be held depressed.
Functions of the load assistance switch:
- to raise the stored roof sections
- to lower the stored roof sections
- to stop operation of the load assistance.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.