Service Valves

2009 Volvo C70 AutomaticSECTION Service Valves
Fig 1: Identifying Service Valves
GLL146288Courtesy of VOLVO CARS CORPORATION
  1. Service valve for emptying and vacuum pumping.
  2. Service valve for emptying, vacuum pumping and filling of refrigerant.

The service valves are used for:

  • checking the system through manometer connections
  • draining the system of refrigerant
  • vacuum pumping
  • filling of refrigerant, which normally takes place on the low pressure side but can also take place on the high pressure side in an orifice system such as this.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.