Troubleshooting

2007 Volvo XC90 AWD L6-3.2L VIN 98 B6324SSECTION Troubleshooting





Troubleshooting BCM-C110668

Checking the diagnostic trouble codes (DTCs)
If diagnostic trouble code BCM-C110668 is stored by itself, it can be erased.
If diagnostic trouble code BCM-C110687 is stored together with BCM-C110668, read out the diagnostic trouble codes from the steering angle sensor (SAS) and troubleshoot the system.
Select an alternative:
1. Diagnostic trouble code BCM-C110668 is stored by itself.
2. Diagnostic trouble codes BCM-C110687 and BCM-C110668 are stored together.





1 - Erasing diagnostic trouble code (DTC)

2 - DONE

-------------------------------------------------

Erasing diagnostic trouble code (DTC)




Erasing diagnostic trouble codes (DTCs)

Erasing diagnostic trouble codes (DTCs)




- Ignition on
Erase diagnostic trouble codes (DTCs).





Continue - DONE

-------------------------------------------------

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.