Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2007S40 T-5, AWD, AUTOMATICREPAIR AND DIAGNOSISELECTRICALBODY ELECTRICALELECTRICAL AND FUSES - SYMPTOM RELATED DIAGNOSTIC PROCEDURES (544 BODY)CHECK START SYSTEM (2004-2011)CHECK START SYSTEM (2008)FAULT-TRACINGCHECK LOAD ON STEERING COLUMN LOCK
2007 Volvo S40 T-5, AWD, Automatic
Check Load On Steering Column Lock
2007 Volvo S40 T-5, AWD, AutomaticSECTION Check Load On Steering Column Lock
There are no relevant diagnostic trouble codes (DTCs) for text ID 252 and 165.
This text message means that the steering column lock is under load.
- Remove the key from the ignition switch.
- Turn the steering wheel 90° to the right.
- Insert the key in the ignition switch.
- Check the function of the steering column lock.
Is the function OK?
- YES
Refer to FAULT-TRACING INFORMATION
- NO
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.