Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rear 12V socket
There is a 12V socket on the right-hand side of the cargo compartment. This socket can be used to power a number of accessories.
The socket is directly connected to the 30-supply via a fuse on the rear electronic module (REM).
The rear electronic module (REM) measures the power consumption and calculates an average value. This is compared with a limit value to determine if any power consuming component is connected.
This information is transmitted via the controller area network (CAN) to the driver information module (DIM) which displays a text message when a power consuming component is connected.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.