Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Volvo V70 Base, 2.4 61, StandardFACTORY OEM SERVICE PROCEDURE
DRIVER DOOR MODULE (DDM) DTCs
DRIVER DOOR MODULE (DDM) DTC INDEX
| Volvo Code | Description |
|---|---|
| DDM-0019 | Lock, driver's door. Signal too low |
| DDM-001A | Driver's door lock. Signal too low |
| DDM-001B | Driver's door lock. Signal too low |
| DDM-001D | Central locking button. Internal fault |
| DDM-0034 | Driver-side window control. Signal faulty |
| DDM-0035 | Passenger-side window control. Signal faulty |
| DDM-0036 | Control, left rear side window. Faulty signal |
| DDM-0037 | Control, right rear side window. Faulty signal |
| DDM-0038 | Control, door mirror. Faulty signal |
| DDM-0039 | Child-proof lock. Stuck in the active position |
| DDM-003B | Control, driver's window. Faulty signal |
| DDM-003C | Passenger-side window control. Signal too high |
| DDM-003D | Rear left side-window control. Signal too high |
| DDM-003E | Rear right side-window control. Signal too high |
| DDM-003F | Rear-view mirror control. Signal too high |
| DDM-0040 | Rear-view mirror selector control. Signal too high |
| DDM-0045 | Door mirror lamp. Signal too low |
| DDM-0047 | Power supply. Signal too low |
| DDM-0049 | Control unit. Internal fault |
| DDM-004A | Outside temperature sensor. Signal too high |
| DDM-004B | Outside temperature sensor. Signal missing |
| DDM-004C | Control module. Internal fault |
| DDM-004D | Control module. Internal fault |
| DDM-E001 | Control module communication. Faulty communication |
| DDM-E003 | Configuration fault. Faulty configuration |
| DDM-XXXX | Unknown diagnostic trouble code (DTC) for the current control module version |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.