2004 Volvo S80 Base, 2.9 92FACTORY OEM SERVICE PROCEDURE

Rear Electronic Module (Rem) DTCS

REAR ELECTRONIC MODULE (REM) - DTC INDEX

DTC Description
REM-1A01 30-Power supply. Signal too low. Intermittent fault
REM-1A01 30-Power supply. Signal too low. Permanent fault
REM-1A04 Relay, 15I supply. Signal too high
REM-1A05 Relay, 15I supply. Signal too low
REM-1D01 Control unit. Internal fault. Intermittent fault
REM-1D01 Control unit. Internal fault. Permanent fault
REM-1D02 Control unit software. Internal fault. Intermittent fault
REM-1D02 Control unit software. Internal fault. Permanent fault
REM-1D03 Control unit not fully programmed. Internal fault. Intermittent fault
REM-1D03 Control unit not fully programmed. Internal fault. Permanent fault
REM-1D07 Control unit. Internal fault. Intermittent fault
REM-1D07 Control unit. Internal fault. Permanent fault
REM-3FD3 Relay, gas tank valve. Signal too low
REM-4A31 Fuel gauge sensor. Signal faulty. Intermittent fault
REM-4A31 Fuel gauge sensor. Signal faulty. Permanent fault
REM-4A33 Fuel gauge sensor. Signal too high/Signal missing. Intermittent fault
REM-4A33 Fuel gauge sensor. Signal too high/Signal missing. Permanent fault
REM-4A34 Fuel gauge sensor. Signal too low. Intermittent fault
REM-4A34 Fuel gauge sensor. Signal too low. Permanent fault
REM-4A35 Fuel gauge sensor. Signal faulty. Intermittent fault
REM-4A35 Fuel gauge sensor. Signal faulty. Permanent fault
REM-4A37 Fuel gauge sensor. Signal too high/Signal missing. Intermittent fault
REM-4A37 Fuel gauge sensor. Signal too high/Signal missing. Permanent fault
REM-4A38 Fuel gauge sensor. Signal too low. Intermittent fault
REM-4A38 Fuel gauge sensor. Signal too low. Permanent fault
REM-4A39 Fuel level, gas. Signal too low
REM-4A40 Gas temperature sensor. Signal too high
REM-4A41 Gas temperature sensor. Signal too low
REM-4A42 Gas pressure sensor. Signal too high
REM-4A43 Gas pressure sensor. Signal too low
REM-4A44 Fuel level, gas. Faulty signal
REM-4A45 Fuel level, gas. Signal too high
REM-4A46 Fuel level, gas. Signal too low
REM-4F41 Communication with parking assistance module (PAM). Signal missing
REM-4F42 Back-up warning sensor 1. Faulty signal
REM-4F43 Back-up warning sensor 2. Faulty signal
REM-4F44 Back-up warning sensor 3. Faulty signal
REM-4F45 Back-up warning sensor 4. Faulty signal
REM-4F4A Parking assistance module (PAM). Faulty signal
REM-4F90 Sensor, seat belt reminder. Signal too high
REM-4F91 Sensor, seat belt reminder. Signal too low
REM-4F92 Sensor, seat belt reminder. Signal missing
REM-4F93 Sensor, seat belt reminder. Faulty signal
REM-6A01 Relay, central locking. Signal too high
REM-6A03 Relay, central locking. Signal too low
REM-6A04 Unlocking relay, central locking rear left door. Signal too high
REM-6A04 Unlocking relay. Rear left door central locking. Signal too high. Intermittent fault
REM-6A05 Unlocking relay, central locking, rear left door. Signal missing
REM-6A06 Relay, deadlock. Signal too high
REM-6A08 Relay, deadlock. Signal missing
REM-6A0B Locking relay. Rear right door central locking. Signal missing/too low. Intermittent fault
REM-6A0C Unlocking relay, central locking rear right door. Signal too high
REM-6A0E Unlocking relay, central locking rear right door. Signal missing
REM-6C11 Level sensor, power supply. Signal too high. Intermittent fault
REM-6C11 Level sensor, power supply. Signal too high. Permanent fault
REM-6C12 Level sensor, voltage supply. Signal too low. Intermittent fault
REM-6C12 Level sensor, voltage supply. Signal too low. Permanent fault
REM-6C15 Communication with level sensor. Signal missing. Intermittent fault
REM-6C15 Communication with level sensor. Signal missing. Permanent fault
REM-6C16 Level sensor. Internal fault. Intermittent fault
REM-6C16 Level sensor. Internal fault. Permanent fault
REM-6F11 Head rest relay Signal too high. Permanent fault
REM-6F11 Head restraint relay. Signal too high. Intermittent fault
REM-6F13 Head restraint relay. Signal missing. Intermittent fault
REM-6F13 Head restraint relay. Signal missing. Permanent fault
REM-6F51 Boot lid handle. Signal too low. Intermittent fault
REM-6F51 Boot lid handle. Signal too low. Permanent fault
REM-6F52 Unlocking relay, central locking tailgate. Signal too high
REM-6F54 Unlocking relay, central locking tailgate. Signal missing
REM-6F71 Unlocking relay, central locking, fuel tank filler cover. Signal too high
REM-6F73 Unlocking relay, central locking, fuel tank filler cover. Signal missing
REM-8C21 Rear fog lamp relay. Signal too high. Intermittent fault
REM-8C21 Rear fog lamp relay. Signal too high. Permanent fault
REM-8C23 Rear fog lamp relay. Signal missing. Intermittent fault
REM-8C23 Rear fog lamp relay. Signal missing. Permanent fault
REM-8D12 Stop lamp. Signal too low
REM-8D13 Stop lamp. Signal too high / Signal missing
REM-8E11 Reversing light relay. Signal too high. Intermittent fault
REM-8E11 Reversing light relay. Signal too high. Permanent fault
REM-8E13 Reversing light relay. Signal missing. Intermittent fault
REM-8E13 Reversing light relay. Signal missing. Permanent fault
REM-8F10 Position sensor xenon lamp. Signal too high
REM-8F11 Xenon lamp position sensor. Signal too low
REM-8F12 Xenon lamp position sensor. Faulty signal
REM-8F13 Bi-Xenon lamp position sensor. Calibration fault
REM-8F61 Rear window defroster relay. Signal too high. Intermittent fault
REM-8F61 Rear window defroster relay. Signal too high. Permanent fault
REM-8F63 Rear window defroster relay. Signal missing. Intermittent fault
REM-8F63 Rear window defroster relay. Signal missing. Permanent fault
REM-9F21 Luggage compartment lighting Faulty signal. Intermittent fault
REM-9F21 Luggage compartment lighting Faulty signal. Permanent fault
REM-E001 Control module communication. Faulty communication
REM-E003 Configuration fault. Faulty configuration
REM-XXXX Unknown diagnostic trouble code (DTC) for the current control module version
Chapter Navigation
Return to Chapter: DTC Index
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.