Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Volvo S80 Base, 2.5 59, FWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.75 OZS. | 0.19 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.20 LBS. | 0.99 KG | R-134a | S | |||
| Automatic Transmission Fluid | 5 Spd Trans | 13.40 QTS. | 12.68 L | JWS 3309 | Different types of oil should never be mixed. | S | |
| Brake Fluid | 0.63 QTS. | 0.59 L | DOT 4+ Brake Fluid | S | |||
| Engine Coolant | Base | 9.30 QTS. | 8.8 L | 50/50 mixture of VOLVO Antifreeze/Coolant and water | S | ||
| Engine Oil | 7.30 QTS. | 6.9 L | API - SAE 5W-30 | When temperatures exceed 86Deg.F (30Deg.C) VOLVO recommends SAE 10W-30. Under normal use when temperatures DO NOT exceed 86Deg.F (30Deg.C), SAE 5W-30 will provide good fuel economy and engine protection. Synthetic oils meeting SAE 10W-30 and complying with quality requirements are recommended for driving in areas of sustained temperatures extremes (hot or cold), when towing a trailer over long distances, and for prolonged driving in mountainous areas. | S | ||
| Fuel Tank | 21.10 GALS. | 79.87 L | S | ||||
| Windshield Washer Fluid | 4.70 QTS. | 4.44 L | Reservoir should be filled with water and solvent (winter time: windshield washer antifreeze). | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.