Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Volvo S60 Base, 2.4 61, StandardFACTORY OEM SERVICE PROCEDURE
Transmission Control Module (TCM) Transmission Diagnostic Trouble Codes - 7 Of 7
- TCM-012C: Neutral Check. The Engine Speed (Rpm) Oscillates (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
- TCM-012C: Neutral Check. The Engine Speed (Rpm) Oscillates (Aw50/51 AWD; 2002)
- TCM-012C: Neutral Check. The Engine Speed (Rpm) Oscillates (Aw55-50/51SN; 2001-2002)
- TCM-012D: Gear Shift Function. Wrong Gear Ratio (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-012E: Reverse Gear. Wrong Gear Ratio (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0131: Linear Pressure Solenoid SLC1. Signal Too Low (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0133: Linear Pressure Solenoid SLC1. Signal Too High (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0134: Linear Pressure Solenoid SLC1. Faulty Signal (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0139: Linear Pressure Solenoid SLC2. Signal Too Low (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-013B: Linear Pressure Solenoid SLC2. Signal Too High (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-013C: Linear Pressure Solenoid SLC2. Faulty Signal (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0141: Linear Pressure Solenoid SLC3. Signal Too Low (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0143: Linear Pressure Solenoid SLC3. Signal Too High (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0144: Linear Pressure Solenoid SLC3. Faulty Signal (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0149: Linear Pressure Solenoid SLB1. Signal Too Low (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-014B: Linear Pressure Solenoid SLB1. Signal Too High (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-014C: Linear Pressure Solenoid SLB1. Faulty Signal (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0240: Transmission. Gear Change To Short (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0288: Gear Selector Hall Sensor. Internal Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0293: Gear Selector Hall Sensor. Internal Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0299: Transmission Control Module (TCM). Internal Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-029A: Transmission Control Module (TCM). Internal Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0A01: Control Module Communication. Signal Missing From Brake Control Module (BCM) (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0A02: Control Module Communication. Signal Missing From Brake Control Module (BCM) (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0A11: Gear-Shift Position Sensor. Calibration Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0A12: Gear-Shift Position Sensor. Calibration Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0A30: Control Module Communication. Signal Missing From Engine Control Module (ECM) (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-0A31: Control Module Communication. Signal Missing From Engine Control Module (ECM) (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-Dd00: Control Module Communication. Communication Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-Dd01: Control Module Communication. Communication Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-Dd02: Control Module Communication. Communication Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-Dd10: Control Module Communication. Communication Fault (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-E000: Control Module Communication. Faulty Communication (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-E000: Control Module Communication. Faulty Communication (Aw50/51 AWD; 2002-2004)
- TCM-E000: Control Module Communication. Faulty Communication (Aw50/51 AWD; 2005-2009)
- TCM-E000: Control Module Communication. Faulty Communication (Aw55-50/51SN; 2001-2002)
- TCM-E003: Control Module Communication. Faulty Configuration (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-E003: Configuration Fault. Faulty Configuration (Aw50/51 AWD; 2005-2009)
- TCM-E003: Configuration Fault. Faulty Configuration (Aw50/51 AWD; 2002-2004)
- TCM-E003: Configuration Fault. Faulty Configuration (Aw55-50/51SN; 2001-2002)
- TCM-E010: Power Supply. Faulty Voltage (B5254T4, TF-80SC AWD; 2006-2007)
- TCM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version (Aw50/51 AWD; 2002-2009)
- TCM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version (Aw55-50/51SN; 2001-2009)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.