Diagnostic Trouble Code (DTC) Information

2003 Volvo V70 2.4 L5-2.4L VIN 61 B5244SSECTION Diagnostic Trouble Code (DTC) Information





Diagnostic trouble code (DTC) information ECM-510F

Condition
Diagnostic trouble code (DTC) ECM-510F is stored if the engine control module (ECM) registers a fault in the vehicle speed signal.
Diagnostic trouble code (DTC) ECM-510F can be diagnosed when the engine is running.

Substitute value
- The cruise control is disengaged when the fault is active
- Certain diagnostics use the engine speed (RPM) instead of the vehicle speed.

Possible source
- Fault in the Control area network (CAN)
- Incorrect input signals to the brake control module (BCM) or transmission control module (TCM)
- Defective brake control module (BCM)
- Defective transmission control module (TCM).

Fault symptom[s]
- Cruise control does not function at all.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.