Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2003S60 2.4 L5-2.4L VIN 61 B5244SREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLPARKING BRAKE SYSTEMPARKING BRAKE RELEASE SWITCHSERVICE AND REPAIR
2003 Volvo S60 2.4 L5-2.4L VIN 61 B5244S
Parking Brake Release Switch: Service and Repair
2003 Volvo S60 2.4 L5-2.4L VIN 61 B5244SSECTION Service and Repair
Parking brake switch, replacing
Removal
Parking brake switch
- Remove the parking brake lever. See Replacing the parking brake lever Replacing the Parking Brake Lever
- Cut or grind off the rivet head. Remove the remainder of the rivet
- Remove the parking brake switch.
Installation
Parking brake switch
- Rivet the parking brake switch into position. Use pop rivet (937881)
- Install the parking brake lever. See Replacing the parking brake lever Replacing the Parking Brake Lever.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.