Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2001C70 COUPE L5-2.3L TURBO VIN 53 B5234T3REPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONMANUFACTURER CODE CHARTSECM CODES (ENGINE CONTROL MODULE)ECM-6000SIGNAL MISSING. INTERMITTENT FAULT
2001 Volvo C70 Coupe L5-2.3L Turbo VIN 53 B5234T3
Signal Missing. Intermittent Fault
2001 Volvo C70 Coupe L5-2.3L Turbo VIN 53 B5234T3SECTION Signal Missing. Intermittent Fault
Signal missing. Intermittent fault
Checking cables and connectors
Check connector for air conditioning (A/C) relay for contact resistance and oxidation according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults and loose connections according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults
Check signal cable between control module #B44 and air conditioning (A/C) relay #4 and power supply between system relay #3 and A/C relay #2 for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Other information
- To connect the breakout box/access the control module, see Connecting the breakout box, B5234T9, B5244T7 Connecting The Breakout Box
- To access/replace the air conditioning (A/C) relay, see Integrated relay/fusebox, engine compartment, replacing Integrated Relay/Fusebox, Engine Compartment, Replacing
- For information about signals, see Signal specification Signal Specifications
Continue - Fault-tracing information
DONE
-------------------------------------------------
Fault-tracing information
Information
Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).
Do you want to view the information again?
Yes - Attempt New Test
No - FAULT FOUND
------------------------
Attempt New Test - Checking cables and connectors
FAULT FOUND - DONE
-------------------------------------------------
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.