Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Volvo S40FACTORY OEM SERVICE PROCEDURE
Technical Service Bulletins
- A/C Compressor
- Accessories & Equipment
- Accessories Control Systems
- Initial Quality Survey (IQS) PDS + (SMB17-026-2022-10-17)
- Control Module Swapping (TJ 31946.1.2)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- Restoring CUSTOMERS' Preferred Settings (SMB39-009)
- CEM Recovery After SWDL Interrupt (37-39)
- MIDTRONICS PSC-550 Vehicle Power Supply Use Required During Software Download. Includes Mobile Technician Program (30-04)
- Central Locking Motor In The Front And Rear Doors, Securing/Changing (GROUP 83, NO. 0039)
- Air Bag, SRS
- Anti-Theft Systems
- Automatic Trans
- VOLVO Lifetime Replacement Parts & Labor Warranty (SMB00-342)
- Mandatory VOLVO Special Tool List (ST-001-2020)
- Mandatory VOLVO Special Tool List (ST-001-2021)
- VOLVO Service 2.0 (SMB39-013)
- VIDA License Agreement And Unauthorized Software (SMB00-332)
- Transmission And All Wheel Drive (AWD) Lubricants (TJ16773)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- P1 And P2 Can Module Recovery Method For Failed Software Download (TJ27236)
- Automatic Transmission Cooler/Lines Flushing (TJ19495)
- Automatic Transmission Cooler/Lines Flushing (RTJ 19495)
- Retailer Technical Journal 16724 Coolant Contamination In Automatic Transmissions (43-48)
- Automatic Transmission Cooler/Lines Flushing (43-56)
- Automatic Transmission Diagnostic Sheet (43-08)
- CANBUS Network Information (RTJ 16386)
- Transmission And AWD Lubricants (40-04)
- Auxiliary Emission Control Systems
- Axle Shafts
- Body Electrical
- Body Interior
- Control Module Swapping (TJ 31946.1.2)
- VOLVO Service 2.0 (SMB39-013)
- VIDA License Agreement And Unauthorized Software (SMB00-332)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- CANBUS Network Information (RTJ 16386)
- Central Locking Motor In The Front And Rear Doors, Securing/Changing (GROUP 83, NO. 0039)
- Brakes Control Systems
- VOLVO Lifetime Replacement Parts & Labor Warranty (SMB00-342)
- VOLVO Service 2.0 (SMB39-013)
- VIDA License Agreement And Unauthorized Software (SMB00-332)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- VIDA Upcoming Technology (SMB00-290)
- CANBUS Network Information (RTJ 16386)
- Brake Vacuum Pump, Installed At A New Position (52-0011)
- Charging Systems
- Communication Devices
- Cooling Fan
- Cruise Control Systems
- Differentials & Drive Axles
- Engine Control Systems
- SW Part Numbers For Total Upgrade And PDS (TJ 27536.21.1)
- Control Module Swapping (TJ 31946.1.2)
- VOLVO Service 2.0 (SMB39-013)
- Vantage Pro Oscilloscope Update - 14.4 Software Release Supersedes The June 10, 2014 Edition (150A)
- VIDA License Agreement And Unauthorized Software (SMB00-332)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- P1 And P2 Can Module Recovery Method For Failed Software Download (TJ27236)
- VIDA Upcoming Technology (SMB00-290)
- Pressure Washing Engines (TJ21507)
- CANBUS Network Information (RTJ 16386)
- Engine Management Software Usage (20-04)
- MIDTRONICS PSC-550 Vehicle Power Supply Use Required During Software Download. Includes Mobile Technician Program (30-04)
- ECM REPROGRAMMER Procedure Through VIDA (28-61)
- Replacing The PTC Nipple In Positive Crankcase Ventilation (PCV) System (25-0040)
- SRS Cable Harness, Replacing And Repairing Cable Harnesses Based On SRS Diagnostic Trouble Codes (DTCS) (88-0030)
- Fuel Pressure Ems 2000, Measuring/Fault Tracing (GROUP 23, NO. 0050)
- Entertainment Systems
- Exhaust
- Exterior Body Panels
- Exterior Lights
- Front Suspension
- Fuel System
- Headlights
- HVAC Control Systems
- Animation: Evaporator Climate Unit, Cleaning (SPJ32811.2.0)
- Retailer Technical Journal 19292 Climate Control System, Cleaning (19292)
- Retailer Technical Journal 19292 Climate Control System, Cleaning (TJ 19292)
- Control Module For The Blower Fan Motor, Installing (87-0025)
- Evaporator, Application Of A Protective Coating (87-0024)
- Identification
- Infotainment
- Interior/Exterior Trim
- Service Action S89833 Replace Headliner Clip (S89833)
- Leather Upholstery Care (RTJ 24661)
- Checking And Adjusting Rubber Seals And Seams (84-0034)
- Outer Rear Lamp Housing/Gusset Panel, Paint Or Body Repair (81-0011)
- PUR Bonded Windows, New Adhesive Kit (84-0033)
- Installing A Protective Cover On The Front Seat (GROUP 85, NO. 0026)
- Lubrication System
- Expendable Items Parts List (SMB00-108D)
- Engine Oil Consumption Test FAQ (SMB22-006)
- Expendable Items Reimbursement - Oil (SMB22-206)
- Required Engine Oils (12,000 Km Intervals) (SMB22-003C)
- Required Engine Oils (7,500 Miles/12,000 Km Intervals) (SMB22-003)
- Procedure For Cleaning Engine Oil System Contamination (20-05)
- Oil Pump Attachment Screws, Copper Washer Installation (21-0048)
- Manual Steering
- Manual Trans
- Mechanical
- VOLVO Lifetime Replacement Parts & Labor Warranty (SMB00-342)
- VOLVO Engine Oil Consumption (SMB22-007)
- Mandatory VOLVO Special Tool List (ST-001-2020)
- Mandatory VOLVO Special Tool List (ST-001-2021)
- Timing Belt Replacement Interval For Model Years 1999 And Up (SMB21-14)
- Hydraulic Versus Mechanical TENSIONERS (TT001-13)
- Required Engine Oils (12,000 Km Intervals) (SMB22-003C)
- Required Engine Oils (7,500 Miles/12,000 Km Intervals) (SMB22-003)
- Pressure Washing Engines (TJ21507)
- Procedure For Cleaning Engine Oil System Contamination (20-05)
- Replacing The PTC Nipple In Positive Crankcase Ventilation (PCV) System (25-0040)
- Piston Rings, Replacing (21-0050)
- Pistons, Replacing (SB21-0042-0403)
- Rear Crankshaft Seal, Replacing (SB21-0049-0403)
- Oil Pump Attachment Screws, Copper Washer Installation (21-0048)
- Exhaust Manifold, Retaining Nuts - Missing Or Loose (GROUP 25, NO. 0026)
- Connecting The Quick Release Connector, Updated Method (GROUP 23, NO. 0052)
- Piston Cooling Valve, Replacement (GROUP 22, NO. 0005)
- Mechanical - Hydraulic
- Memory Modules
- Paint & Coatings
- Passive Restraints
- VOLVO Lifetime Replacement Parts & Labor Warranty (SMB00-342)
- Seat Belt Extender - 850, 900, S90, V90, V90CC, S/V40, V50, S/V60, V60CC, S/V70, XC70, C30, C70, S80, XC40, XC60, XC90 (SMB88-001A)
- Electrically Operated Seat, Minimizing Lateral Movement (85-0010)
- Front Seat (Manual Adjustment), Noise (85-0019)
- Procedures
- Data Requests From Lea (Police) And/Or Customers (TJ 28941.5.0)
- VOLVO Wheel Repair Guidelines (SMB77-008)
- High Voltage (HV) Module Balancer Cart (ST-251)
- VIDA Updated Graphical Plotter Functionality Applications - VIDA (SJ1000785)
- Mandatory VOLVO Special Tool List (ST-001-2020)
- Mandatory VOLVO Special Tool List (ST-001-2021)
- Method For Interior Cleaning (Information Only) (TJ 35475.1.2)
- Newsletter 105: Mandatory Tools (ST-237)
- Recall Compliance Clearance Letter Requests (SMB00-440)
- GDPR - Information Notice (SPJ34864.2.0)
- Not Possible To Left Click Ecus In The Network Image For Non-Spa Cars (US34753.1.0 EN-US)
- Rear Suspension
- Restraints Control Systems
- Control Module Swapping (TJ 31946.1.2)
- VOLVO Service 2.0 (SMB39-013)
- VIDA License Agreement And Unauthorized Software (SMB00-332)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- VIDA Upcoming Technology (SMB00-290)
- CANBUS Network Information (RTJ 16386)
- SRS Cable Harness, Replacing And Repairing Cable Harnesses Based On SRS Diagnostic Trouble Codes (DTCS) (88-0030)
- Schedule
- Seats
- Starter
- Steering Column
- Steering Control Systems
- Steering Gear
- Suspension Control Systems
- System
- SW Part Numbers For Total Upgrade And PDS (TJ 27536.21.1)
- Control Module Swapping (TJ 31946.1.2)
- VOLVO Service 2.0 (SMB39-013)
- VIDA License Agreement And Unauthorized Software (SMB00-332)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- P1 And P2 Can Module Recovery Method For Failed Software Download (TJ27236)
- E10 Petrol Fuel Requirements (RTJ 24461)
- Pressure Washing Engines (TJ21507)
- CANBUS Network Information (RTJ 16386)
- VCT 2000 (9511500 And 9511540) And Cable 9511535 Troubleshooting, Firmware Upgrade, VCT 2000 Recovery (30-05)
- Replacing The PTC Nipple In Positive Crankcase Ventilation (PCV) System (25-0040)
- SRS Cable Harness, Replacing And Repairing Cable Harnesses Based On SRS Diagnostic Trouble Codes (DTCS) (88-0030)
- Fuel Pressure Ems 2000, Measuring/Fault Tracing (GROUP 23, NO. 0050)
- Towing
- Towing Systems
- Transfer Case
- Transmission Control Systems
- Control Module Swapping (TJ 31946.1.2)
- VOLVO Service 2.0 (SMB39-013)
- VIDA License Agreement And Unauthorized Software (SMB00-332)
- Vantage Pro Oscilloscope Update - 13.4 Software Release Supersedes The March 21, 2013 Edition (ST-150A)
- P1 And P2 Can Module Recovery Method For Failed Software Download (TJ27236)
- VIDA Upcoming Technology (SMB00-290)
- CANBUS Network Information (RTJ 16386)
- MIDTRONICS PSC-550 Vehicle Power Supply Use Required During Software Download. Includes Mobile Technician Program (30-04)
- Wheel Alignment
- Wheels & Tire System
- Window Motors & Regulators
- Wiper/Washer Systems
- Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
