Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO1987240 GL, 4D SEDAN, AUTOMATIC, AW70REPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 5 (2.3L 4-CYL & 2.3L 4-CYL TURBO)ENGINE SPECIFICATIONSINTERMEDIATE SHAFT SPECIFICATIONS
1987 Volvo 240 GL, 4D Sedan, Automatic, AW70
Intermediate Shaft Specifications
1987 Volvo 240 GL, 4D Sedan, Automatic, AW70SECTION Intermediate Shaft Specifications
WARNING: This page is about a different car, the 1991 Volvo 940, 1991 Volvo 740, and 1991 Volvo 240. However, it is still accessible from the selected car via links, so may be relevant.
INTERMEDIATE SHAFT SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| Front Bearing I.D. Diam. | 1.8512-1.8524 (47.020-47.050) |
| Front Journal O.D. Diam. | 1.8494-1.8504 (46.975-47.000) |
| Center Bearing I.D. Diam. | 1.6957-1.6969 (43.070-43.100) |
| Center Journal O.D. Diam. | 1.6939-1.6949 (43.025-43.050) |
| Rear Bearing I.D. Diam. | 1.6917-1.6929 (43.970-43.000) |
| Rear Journal O.D. Diam. | 1.6900-1.6909 (42.925-42.950) |
| Oil Clearance | .0008-.0030 (.020-.075) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.