Refrigerant Circuit Seals

2022 Volkswagen Tiguan S, FWDSECTION Refrigerant Circuit Seals
  • Replace the seals after removing.
  • Coat the seals with refrigerant oil before installing.
  • Make sure the seals are positioned correctly on the pipe or in the groove.
  • Ensure cleanliness when working. Even the smallest contaminant, a hair for example, can cause a leak.
  • Only install seals that are resistant to refrigerant R1234yf and the corresponding refrigerant oil. Refer to Electronic Parts Information (ETKA).

The dimensions -a and b- are dependent on the component location of the seal. Refer to the Electronic Parts Information (ETKA).

Fig 1: Identifying Seal
GWWN00-11543Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.