Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING: Removing
-- Remove the partition. Refer to FOOTWELL COVER ON FRONT PASSENGER SIDE, REMOVING AND INSTALLING .
-- Disconnect the connectors -3- and -2-.
-- Remove the bolts -1-.
There is a risk of burns from the hot radiating surfaces on the control module.
It is possible to burn hands.
- Wear safety gloves.
-- Remove the Fresh Air Blower Control Module -J126- -4- from the Fresh Air Blower -V2-.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.