Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Wheel, Removing And Installing: Removing
-- Move the steering column to the center height position.
-- Remove the airbag unit with igniter. Refer to AIRBAG UNIT WITH DRIVER AIRBAG IGNITER N95, REMOVING AND INSTALLING .
-- Bring wheels in the straight position. Removing and installing the steering wheel must be performed while in center position.
-- Disconnect the connector -5-.
-- Remove the bolt -2-.
-- Remove the steering wheel -1- from the steering column -4-.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.