Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Roller Test Stand, Testing Vehicles
2022 Volkswagen ID.4 Pro, AWDSECTION Roller Test Stand, Testing Vehicles
The operation takes place on a test stand.
Conditions
- The speed of the test rollers must be at least 3 km/h (1.9 mph) and at maximum 6 km/h (3.7 mph).
The brake test stands available via the Workshop Equipment fulfill these requirements.
Brake Inspection Progress
- Drive the vehicle into the test stand with the axle to be checked.
- Select "N" or "Idle".
- Follow the instructions on the test stand during the further test sequence.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.