Abs Control Module -J104-/Abs Hydraulic Unit -N55-, Removing And Installing

2022 Volkswagen ID.4 Pro, AWDSECTION Abs Control Module -J104-/Abs Hydraulic Unit -N55-, Removing And Installing

Special tools and workshop equipment required 

  • Brake Pedal Actuator: VAG1869/2  .
  • Mini Torque Wrench: VAS6854 
  • Torque Wrench - Assembly Tool : VAG1410/8 
  • Open Ring Spanner Insert - AF 11mm: VAG1410/6 
  • Torque Wrench - Universal Joint : VAG1410/7 
  • Engine Bung Set: VAS6122 

For the Plug Assembly Parts Refer to the Parts Information.

Fig 1: Plug 5 Q 0 698 311
GWWN45-10322Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. M10 plugs
  2. M12 plugs
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.