Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2022ATLAS SEL R-LINEREPAIR AND DIAGNOSISSTEERINGSTEERING LINKAGE48 STEERINGSTEERING COLUMNOVERVIEW - STEERING COLUMNOVERVIEW - STEERING COLUMN, VERSION 1
2022 Volkswagen Atlas SEL R-Line
Overview - Steering Column, Version 1
2022 Volkswagen Atlas SEL R-LineSECTION Overview - Steering Column, Version 1
- Instrument Panel Crossmember
- Steering Column
- Removing and installing. Refer to STEERING COLUMN, REMOVING AND INSTALLING .
- The steering column must be engaged on the instrument panel central tube mounting bracket when installing (assembly aid).
- There are different versions. Refer to the Electronic Parts Information (ETKA).
- Bolt
- 20 Nm
- Replace after removing.
- Note the tightening sequence. Refer to Installing - Tighten the bolts -1, 2, 3 and 4- one after the other to the tightening specification. .
- Bolt
- 20 Nm +90°
- Replace after removing.
- Electronic Steering Column Lock Control Module -J764-
- For vehicles with the keyless access authorization system
- Removing and installing. Refer to Electronic Steering Column Lock Control Module -J764-, REMOVING AND INSTALLING, VERSION 1 .
- Bolt
- 6 Nm
- Quantity: 3
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.