Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rain/Light Recognition Sensor, Removing And Installing: Notes
2022 Volkswagen Atlas SEL R-LineSECTION Notes
CAUTION:
- The Rain/Light Recognition Sensor -G397- has a silicone layer as a contact surface to the windshield.
- The Rain/Light Recognition Sensor -G397- cannot be optionally replaced. Refer to the Electronic Parts Information (ETKA) for the correct Rain/Light Recognition Sensor -G397- based on the part number.
- If the Rain/Light Recognition Sensor -G397- is replaced by another Rain/Light Recognition Sensor -G397- with a different part number, access the respective function with the Vehicle Diagnostic Tester.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.