Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Wiring Harness Repair Set:VAS1978
The Wiring Harness Repair Set:VAS1978 makes optimal repair quality possible in the realm of vehicle electronics. Using the tools, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped on are used and can be connected to vehicle-specific wiring harness by the use of crimp connections. Crimping Pliers:VAS1978/1 with Crimping Pliers - Insert 2 :VAS1978/2 and three different crimp slots and a Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A for shrinking the crimp connections provide a trouble-free electrical connection.
Wiring Harness Repair SetVAS1978
Additional information:
- Refer to Wiring Harness Repair Set:VAS1978B Operating Instructions.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.