Special Tools

Special tools and workshop equipment required 

• Puller - Seal Lever: VW681 
• Drive Sleeve: 30-20 
• Counterhold - Crankshaft Sprocket: 3415 
• Seal Installer - Shaft Seal Ring: T10019 
• Puller - Kukko 3 Jaw - 100x100mm: 12/1 
• Torque Wrench 1601: VAG1601 

Special tools and workshop equipment required 

• Locking Pin Driver: 30-505 
• Bearing Installer - Clutch Housing/Gearbox Bearing: VW554 
• Bushing Installer - Rear Axle Beam: 3128 
• Rear Bushing Tool - Press Piece: T40033/1 
• Assembly Tool Kit - Traverse: T10030/5 
• Bearing Installer - Component: 3346/2  , Control Arm Bearing Installer - Nut: 3346/3 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Puller - Seal Lever: VW681 
• Slide Hammer Set: VW771 
• Holding Fixture - Spacers: VW540/1B 
• Transmission Support - Bolt: 3282/34 
• Seal Installer - Flange Shaft: T10049 
• Bridge from Puller: VAS251415  (Kukko 18-0)
• Sealing Grease. Refer to the Parts Information.

Special tools and workshop equipment required 

• Thrust Piece 3291/1 from the Bushing Tool Kit: 3291 
• Spindle from the Bushing Tool Set: 3292 
• Thrust pieces 3348 and 3348/1 from the Bearing Installer - Multiple Use: 3348 
• Puller - Kukko Internal - 46-56mm: 21/7  -1-
• Puller - Kukko Counterstay: 22/2  -4-

Special tools and workshop equipment required 

• Torque Wrench 5-50Nm: VAG1331 
• Torque Wrench 1332 40-200Nm: VAG1332 
• Engine and Gearbox Jack: VAS6931 

Special tools and workshop equipment required 

• Used Oil Collection and Extraction Unit: SMN372500 
  Fig 5: Engine and Transmission Holder VAS 6095

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Multipoint Socket: T10035  and if necessary Bits for VAG1331/13: T10099 
  Fig 6: Identifying Multipoint Socket T10035

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Charging Device For AWD Clutch Coupling 2 - Adapter 2: VAS6291/1-2 
  Fig 7: Device For Haldex Coupling 2 - Adapter 2VAS6291/2

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Charging Device For AWD Clutch Coupling 2 - Adapter 3: VAS6291/3 
  Fig 8: Identifying Charging Device For Haldex Coupling 2 - Adapter 3 VAS6291/3

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• -1- Internal Puller: VAS251601  (Kukko 21-1)
  Fig 9: Identifying Kukko Puller

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• -4- Counter Support: VAS251621  (Kukko 22-1)
• Tensioning Strap: T10038 
  Fig 10: Identifying Special Tools -- Tensioning Belt T10038

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Guide Pins: T10093 
  Fig 11: Guide Pins T10093

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Counterhold - Kit - Multiple Use: T10172 
  Fig 12: Counterhold Tool T10172

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Torque Wrench 5-50Nm: VAG1331 
  Fig 13: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Shop Crane - Drip Tray: VAS6208 
  Fig 14: Drip Tray For Shop Crane VAS 6208

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Charging Device For AWD Clutch Coupling 2: VAS6291A 
  Fig 15: Identifying Charging Device For Haldex Coupling 2 VAS 6291 A

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Oil Filler - Adapter 2: VAS6262/2 
  Fig 16: Engine & Transmission Jack VAG 1383 A

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller - Seal Lever: VW681 
  Fig 17: Extractor Lever VW 681

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Slide Hammer Set: VW771 
  Fig 18: Adapter VW 771/40 From Slide Hammer-Complete Set VW 771

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Transmission Support - Pins 34: 3282/34 

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Seal Installer - Flange Shaft: 3305 
  Fig 19: Identifying Thrust Piece 3305

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• -2- bridge from Puller - Kukko Puller - 50-110mm Width, 150mm Length: 18/0 
  Fig 20: Commercially Available Puller Set

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.