Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
A/C Compressor, Removing And Installing On Bracket: Removing
-- Remove the noise insulation under the engine. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the right front wheel housing liner if necessary. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Disconnect the connector -6- from the A/C compressor -1-.
-- Remove the bolts -5- and remove the A/C compressor -1-.
Do not loosen the refrigerant pipes on the A/C compressor if only the sub-assembly bracket is being removed.
-- Attach the A/C compressor -1- to the body with something suitable, for example, welding wire -2-.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.