Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rear Glass Panel, Adjusting: Notes
The arrow points in the direction of travel.
-- Pull off the inner seal -5-.
-- Loosen the bolts -4- from the rear glass panel -3-.
-- Adjust the rear glass panel -3- according to the dimensions. Refer to HEIGHT ADJUSTMENT, CHECKING .
-- Tighten the left and right bolts -4-.
-- Install the seal -5- on the frame.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.