Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2016PASSAT R-LINE, 1.8L ENG VIN TREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLANTILOCK BRAKE SYSTEM (SERVICE INFORMATION)45 ANTI-LOCK BRAKING SYSTEM (ABS)CONTROL MODULE AND HYDRAULIC UNITOVERVIEW - CONTROL MODULE AND HYDRAULIC UNIT
2016 Volkswagen Passat R-Line, 1.8L Eng VIN T
Overview - Control Module And Hydraulic Unit
2016 Volkswagen Passat R-Line, 1.8L Eng VIN TSECTION Overview - Control Module And Hydraulic Unit
- ABS Hydraulic Unit -N55-
- Removing and Installing. Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING .
- Disconnecting the ABS Hydraulic Unit -N55- from the ABS Control Module -J104-. Refer to CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT
- ABS Control Module -J104-
- Removing and Installing. Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING .
- Disconnecting the ABS Control Module -J104- from the ABS Hydraulic Unit -N55-. Refer to CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT .
- Bolt
- Quantity: 4
- Always replace if removed
- 2 Nm ± 0.8 Nm
- Brake Line
- To the left front brake caliper
- Identification: 5.25 mm diameter and tube fitting with a M10 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Brake Line
- ABS Hydraulic Unit -N55- for the brake master cylinder/primary piston circuit
- Identification: 6.5 mm diameter and tube fitting with a M12 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Brake Line
- To the right front brake caliper
- Identification: 5.25 mm diameter and tube fitting with a M12 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Brake Line
- ABS Hydraulic Unit -N55- to the brake master cylinder/secondary piston circuit.
- Identification: 6.5 mm diameter and tube fitting with a M12 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Brake Line
- Brake master cylinder/primary piston circuit to the ABS Hydraulic Unit -N55-
- Identification: 6.5 mm diameter and tube fitting with a M12 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Brake Line
- Brake master cylinder/secondary piston circuit to the ABS Hydraulic Unit -N55-
- Identification: 6.5 mm diameter and tube fitting with a M12 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Brake Booster
- Removing and Installing. Refer to BRAKE BOOSTER, REMOVING AND INSTALLING .
- Brake Line
- to left rear brake caliper/brake cylinder
- Identification: 5.25 mm diameter and tube fitting with a M12 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Brake Line
- to the right rear brake caliper/brake cylinder
- Identification: 5.25 mm diameter and tube fitting with a M10 x 1 thread
- with standard tool: 14 Nm
- with special tools VAS 6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
- Hex Fitting Bolt
- 8 Nm
- Rubber Bushing
- Bracket
- after installing, make sure it fits properly
- Bolt
- Quantity: 3
- 8 Nm
- Nut
- Quantity: 2
- 8 Nm
- Bracket
- Rubber Bushing
- Do not press the rubber bushings out of the bracket when installing the bracket.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.