Fastener Tightening Specifications

2016 Volkswagen CC R-Line Executive, 2.0L Eng VIN NSECTION Fastener Tightening Specifications
Components Fastener Size Nm
ABS Control Module to Bracket - 10
Bracket to Bracket to ABS Control Module, Nut - 20
ESP Sensor Unit Nut - 9
Heat Shield to ABS Control Module - 12
Speed Sensor Bolt - 8

Control Module and Hydraulic UnitΒ 

Fastening sequence of brake lines:

Fig 1: Connection Of Brake Lines From Dual Master Brake Cylinder To Hydraulic Unit -- On Hydraulic Unit
GWWN45-10084Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Tightening Specifications Nm
Hydraulic Unit Hex Bolt to Bracket 10
Brake Lines with the ABS Unit: Β 
Brake Lines 1 through 4 (brake calipers) 14
Brake Lines 5 and 6 (brake master cylinder) Β 
8.5 mm 17
6 mm 14
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.