Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Passenger Occupant Detection System Control Module -J706- BRACKET
Removing
-- Attach the Engine/Transmission Holder - Seat Repair Fixture VAS6136 onto the Engine And Transmission Holder VAS6095.
Vehicles with Seat Height Adjustment
-- Bring seat to the uppermost position.
All Vehicles
-- Remove the front seat. Refer to FRONT SEAT .
-- Secure the seat on the Engine/Transmission Holder - Seat Repair Fixture VAS6136.
-- Remove the Passenger Occupant Detection System Control Module -J706-. Refer to Passenger Occupant Detection System Control Module -J706- .
-- Loosen the clips -1-.
-- Remove the bracket -2- from the seat frame -3- in direction of -arrow-.
Installing
-- Install in reverse order of removal.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.