Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Heater And A/C Controls (Manual Climate Control System): Installing
Install in reverse order of removal. Be sure install the control knobs in the same position they were in when they were removed.
Sedan from MY 2011
To set basic settings on the Climatic control module after replacement follow these steps
-- Set the blower on position 1 or 2
-- Start the engine
-- Press and hold the defrost and A/C buttons at the same time
-- Hold the buttons for 5-7 seconds until the defrost, A/C, and recirculation buttons are illuminated
-- Restart the vehicle and recheck all functions before returning the vehicle to the customer.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.