SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013JETTA GLI, 2.0L ENG VIN 6, STANDARD TRANSREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)GENERAL SERVICINGAIR CONDITIONING (SEDAN)87 AIR CONDITIONINGGENERAL INFORMATIONSTART/STOP SYSTEM
2013 Volkswagen Jetta GLI, 2.0L Eng VIN 6, Standard Trans

Start/Stop System

2013 Volkswagen Jetta GLI, 2.0L Eng VIN 6, Standard TransSECTION Start/Stop System

If the vehicle has a start-stop system, perform the following termination conditions to deactivate the start-stop function:

  • Use the Start/Stop button to switch off the Start/Stop System.
  • The battery state of charge does not make it possible to start the engine again (start voltage prediction).
  • The defrost function is active.
  • The heated front windshield is active.
  • The selected temperature deviates more than 8 °C (46 °F) from the actual temperature inside the vehicle.
  • The engine RPM exceeds 1, 200 RPM.
  • The generator is faulty, for example, the ribbed belt is torn.
  • The coolant temperature is not in the specified range of 25 °C to 100 °C (77 to 212 °F).
  • Increasing the blower speed by more than 4 steps.

Further information: 

  • For more information, refer to Self Study Program No. 426; Start/Stop System 2009.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.