Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013JETTA GLI, 2.0L ENG VIN 6, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 110 (DIRECT SHIFT GEARBOX - GENERAL, TECHNICAL DATA - TRANSMISSION CODE: OCG (SEDAN))00 GENERAL, TECHNICAL DATATECHNICAL DATATRANSMISSION/ENGINE ALLOCATION
2013 Volkswagen Jetta GLI, 2.0L Eng VIN 6, Standard Trans
Transmission/Engine Allocation
2013 Volkswagen Jetta GLI, 2.0L Eng VIN 6, Standard TransSECTION Transmission/Engine Allocation
WARNING: This page is about a different variant/trim than selected.
| DSG Transmission | 0CG | ||||
|---|---|---|---|---|---|
| Transmission | Codes | NDR | PLC | PMY | |
| Allocation | Type | Jetta from MY 2011 | Jetta from MY 2011 | Jetta from MY 2011 | |
| Engine | 1.4L TSI - 110 kW | 1.4L TSI - 110 kW | 1.4L TSI - 110 kW | ||
| Gear Ratios | Final drive I for 1st to 4th gear | 71 : 16 = 4.438 | 71 : 16 = 4.438 | 71 : 16 = 4.438 | |
| Z2 : Z1 | Final drive II for 5th gear and 6th gear | 71 : 22 = 3.227 | 71 : 22 = 3.227 | 71 : 22 = 3.227 | |
| Z2 : Z1 | Final drive III for 7th gear and reverse gear | 71 : 17 = 4.176 | 71 : 17 = 4.176 | 71 : 17 = 4.176 | |
| Use the transmission code when ordering replacement parts for a repair. | |||||
| DSG Transmission | 0CG | ||||
|---|---|---|---|---|---|
| Transmission | Codes | PWK | PZV | QHT | |
| Allocation | Type | Jetta from MY 2011 | Jetta from MY 2011 | Jetta from MY 2011 | |
| Engine | 1.4L TSI - 110 kW | 1.4L TSI - 110 kW | 1.4L TSI - 110 kW | ||
| Gear Ratios | Final drive I for 1st to 4th gear | 71 : 16 = 4.438 | 71 : 16 = 4.438 | 71 : 16 = 4.438 | |
| Z2 : Z1 | Final drive II for 5th gear and 6th gear | 71 : 22 = 3.227 | 71 : 22 = 3.227 | 71 : 22 = 3.227 | |
| Z2 : Z1 | Final drive III for 7th gear and reverse gear | 71 : 17 = 4.176 | 71 : 17 = 4.176 | 71 : 17 = 4.176 | |
| Use the transmission code when ordering replacement parts for a repair. | |||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.