Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013BEETLE BASE, 2D HATCHBACK, 2.5L ENG VIN X, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1185 (ENGINE MECHANICAL - 2.5L (HYBRID))ASSEMBLYENGINEFRONT ENGINE BLOCK
2013 Volkswagen Beetle Base, 2D Hatchback, 2.5L Eng VIN X, Standard Trans
Front Engine Block
2013 Volkswagen Beetle Base, 2D Hatchback, 2.5L Eng VIN X, Standard TransSECTION Front Engine Block
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION TABLE
| Item | Part Number | Description |
|---|---|---|
| 1 | 6C301 | Accessory drive belt |
| 2 | 6A228 | Accessory drive belt tensioner |
| 3 | 19D629 | Electric A/C compressor |
| 4 | 8501 | Coolant pump |
| 5 | 6K340 | Crankshaft pulley bolt |
| 6 | 6316 | Crankshaft pulley |
| 7 | 6700 | Crankshaft front seal |
| 8 | 6C315 | Crankshaft Position (CKP) sensor |
| 9 | 6019 | Engine front cover |
| 10 | 6K254 | Timing chain tensioner |
| 11 | 6K255 | Timing chain tensioner arm |
| 12 | 6268 | Timing chain |
| 13 | 6K297 | Timing chain guide |
| 14 | 6C271 | Oil pump chain tensioner |
| 15 | 6A895 | Oil pump chain |
| 16 | 6652 | Oil pump drive gear |
| 17 | 6378 | Diamond washer |
| 18 | 6306 | Crankshaft sprocket |
| 19 | 6378 | Diamond washer |
| 20 | 6600 | Oil pump |
| 21 | 6010 | Cylinder block |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.