SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2012JETTA TDI, 4D WAGON, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 78 (MAINTENANCE PROCEDURES (SEDAN))03 MAINTENANCE, DIAGNOSISMAINTENANCE PROCEDURESRADIO AND RADIO NAVIGATION SYSTEM, ENTER THE PIN FOR THE ANTI-THEFT CODE AND ASSIGN SOME LOCAL RADIO STATIONS TO THE STATION BUTTONSBLAUPUNKT NAVIGATION SYSTEM AND RADIO "TRAVELPILOT DX-R4 / RN S4"
2012 Volkswagen Jetta TDI, 4D Wagon, Standard Trans

BLAUPUNKT NAVIGATION SYSTEM AND RADIO "TravelPilot DX-R4 / RN S4"

2012 Volkswagen Jetta TDI, 4D Wagon, Standard TransSECTION BLAUPUNKT NAVIGATION SYSTEM AND RADIO "TravelPilot DX-R4 / RN S4"
WARNING: This page is about a different variant/trim than selected.

Radios/navigation systems are supplied having a fixed code. Fixed code means that every unit with anti-theft coding has been programmed with its own code. This fixed code must be activated after installation.

For unit Blaupunkt "TravelPilot DX-R4 / RN S4", activate fixed code as follows:

The security coding of the unit is not active until the code number is entered. Activate the security code as follows:

-- Turn on the radio/navigation system by pressing button -5-.

Fig 1: Identifying "Base" Or "Function Menu"
GWWN01-10204Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- The coding is activated in the set-up menu "SECURITY" -arrow- as follows:

Fig 2: Identifying "Base" Or "Function Menu"
GWWN01-10206Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Start in a "base" or "function menu".

Fig 3: Identifying "Base" Or "Function Menu"
GWWN01-10204Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the MEN  button -3- "TWO TIMES".

Unit switched to Set-up Menu.

If the "settings" menu or the "navigation menu" is active:

-- Press the MEN  button -3- "ONE TIME".

Unit switched to Set-up Menu.

In order to perform adjustments and activate menu points,

-- move the selection bar with the right turn/push button -4-.

-- Select "SAFETY" -arrow-.

Fig 4: Identifying "Base" Or "Function Menu"
GWWN01-10206Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- In the "SAFETY" set-up menu, mark the menu point "CODE" and press the push/turn button -4-.

Fig 5: Identifying "Base" Or "Function Menu"
GWWN01-10204Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Enter the number code by turning the right turn/push button in the number display -arrow 1-. Press the right turn/push knob briefly after entering each number to confirm.

Fig 6: Identifying Code Of "Return Symbol" -2-
GWWN01-10205Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.