Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Telephone Transceiver -R36-, From 07.06
The telephone transceiver is installed under front right seat.
Removing
- Turn off the ignition and all electrical consumers.
- Remove the key.
-- Remove the cell phone -R54- from the telephone baseplate -R126-.
-- Move the right front seat into its highest position and the move it all the back.
-- Push the foam insert forward in -direction of arrow-.
-- Turn over the foam insert.
-- Pry the telephone transceiver -1- out of the foam insert -2-.
-- Disconnect the connector -3- from the telephone transceiver -1-.
Installing
Install in reverse order of removal.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.