SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2012JETTA TDI, 4D SEDAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 144 (ANTI-LOCK BRAKE SYSTEM (CONVERTIBLE))45 ANTI-LOCK BRAKE SYSTEMREMOVAL AND INSTALLATIONABS CONTROL MODULE -J104- AND ABS HYDRAULIC UNIT -N55-, VEHICLES WITH GASOLINE ENGINENOTES
2012 Volkswagen Jetta TDI, 4D Sedan, Standard Trans

ABS Control Module -J104- AND ABS Hydraulic Unit -N55-, VEHICLES WITH GASOLINE ENGINE: Notes

2012 Volkswagen Jetta TDI, 4D Sedan, Standard TransSECTION Notes
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

  • Torque Wrench 1331 5-50 Nm VAG1331
  • Open Ring Spanner Insert - AF 11 mm VAG1410/6
  • Torque Wrench - Universal Joint VAG1410/7
  • Mini Torque Wrench VAS 6854
  • Brake Pedal Actuator VAG1869/2.
  • Torque Wrench - Assembly Tool VAG1410/8
  • Hose Clip Pliers VAS 6340
  • Bleeder Bottle
  • Brake Bleeding Tool Set VAS 6564
Fig 1: Plug 5 Q0 698 311
GWWN45-10322Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 -

M10 plug

2 -

M12 plug

Fig 2: Identifying Sealing Plug Repair Set, Part No. 1 H0 698 311 A
GWWN45-0039Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the transportation protection after removing the ABS Hydraulic Unit -N55-.

The warranty on the ABS Hydraulic Unit -N55- will not be honored if there is no transportation protection.

1 -

Transport protection for valve body (foam)

2 -

Sealing plugs M10

3 -

Sealing plugs M12

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.