Model Year: 2012 JETTA /GLI

2012 Volkswagen Jetta TDI, 4D Sedan, Standard TransSECTION Model Year: 2012 JETTA /GLI
CAUTION:

All quantities are approximate. Always refer to the Repair Service Information and/or the Maintenance Procedures for correct filling instructions.

Part numbers are for reference only. Always check with your parts department for the latest information.

Component/System Capacity Part Number/Specification
1.8 L CPKA/CPRA
  Oil and Filter Change 5.5 L (5.7 qt.) VW 502 00
Coolant 8.0L (8.5 qt.) G 13 (TL-VW 774 J)
2.0 L TDI Engine
  Oil and Filter Change 4.3 L (4.5 qt.) VW 507 00
Coolant 8.0 L (8.5 qt.) G 13 (TL-VW 774 J)
2.0L CBPA
  Oil and Filter Change 3.7 L (3.9 qt.) VW 502 00
Coolant 5.0 L (5.3 qt.) G 13 (TL-VW 774 J)
2.0L CCTA/CBFA
  Oil and Filter Change 4.6 L (4.9 qt.) VW 502 00
Coolant 8.0 L (8.5 qt.) G 012 A8G or G 012 A8F
2.0L CPLA/CPPA
  Oil and Filter Change 5.5 L (5.8 qt.) VW 502 00
Coolant 8.0 L (8.5 qt.) G 13 (TL-VW 774 J)
2.5 L Engine CBTA/CBUA
  Oil and Filter Change 6.0 L (6.3 qt.) VW 502 00
Coolant 9.0 L (9.5 qt.) G 012 A8G or G 012 A8F
5 Speed Manual Transmission 0A4
  Initial Fill 1.9 L (2.0 qt.) G 052 512 A2
5 Speed Manual Transmission 0AF
  Initial Fill 2.0 L (2.1 qt.) G 070 726 A2
6 Speed Manual Transmission 02Q
  Initial Fill 2.3 L (2.4 qt.) G 052 171 A2
6 Speed Automatic Transmission 09G
  Initial Fill - Gen 1 7.0 L (7.4 qt.) G 055 025 A2
Initial Fill - Gen 2 6.1 L (6.4 qt.) G 055 540 A2
6 Speed Direct Shift Gearbox 02E
  Initial Fill 7.2 L (7.6 qt.) G 052 182 A2
Refill 5.2 L (5.5 qt.)
A/C System
  Refrigerant, Gasoline Engines 525 ± 25 g (18.5 ± 0.9 oz.) See ETKA
Refrigerant, TDI Engines 600 ± 25 g (19.2 ± 0.8 oz.) See ETKA
PAG Oil 110 ± 10 cc (3.7 ± 0.3 fl. oz.) G 052 200 A2
Brake System
  - 1.2 L (1.3 qt.) B 000 750
Window/Headlamp Washer System
  - 3.0 - 4.0 L (3.1 - 4.2 qt.) G 052 164*
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.