Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Headlamp Washer System, Bleeding
After assembly work or when first operating, headlamp cleaning system must be ventilated to ensure proper function of lift cylinders and spray nozzles.
-- Fill tank for window washer system and headlamp cleaning system.
-- Start the engine.
-- Switch the headlamps to "ON".
-- Operate headlamp cleaning system several times (3-5 impulses for every 3 second period).
-- If necessary, repeat this ventilation procedure until proper function of lift cylinders and spray nozzles is obtained.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.