SYS.OK|MANUAL.DB● LIVE
2012 Volkswagen CC R-Line, 2.0L Eng VIN P, Automatic DCT Trans

Quick Lookups: Fluids

2012 Volkswagen CC R-Line, 2.0L Eng VIN P, Automatic DCT TransSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/Delphi, Sanden or Zexel Compressor 4.00 OZS. 0.11 L PAG 46 S
Air Cond Compressor Oil w/Denso Compressor 4.70 OZS. 0.13 L PAG 46 S
Air Cond Refrigerant 1.20 LBS. 0.54 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD 02E Initial Fill 7.40 QTS. 7 L VOLKSWAGEN Automatic Transmission Fluid G 052 182 A2 Part numbers are for reference only. Approximate capacity. S
Automatic Transmission Fluid Trans Mfr CD 02E Refill 5.50 QTS. 5.2 L VOLKSWAGEN Automatic Transmission Fluid G 052 182 A2 Part numbers are for reference only. Approximate capacity. S
Brake Fluid 1.30 QTS. 1.23 L Part No. B 000 750. S
Engine Coolant 2.0L Eng 8.50 QTS. 8.04 L G 12 plus-plus (TL-VW 774 G) Part No. G 012 A8G or G 12 plus (TL-VW 774 F) Part No. G 012 A8F. S
Engine Oil 2.0L Eng 4.90 QTS. 4.63 L SAE 5W-40 or SAE 5W-30. Synthetic oils. Engine oil must conform to the exact specification in VW publication VW 502 00. See TSB No. 17 09-07 (2012855). Use only a high-quality engine oil that expressly complies with the Volkswagen oil quality standard specified for your vehicle's engine. Using any other oil can cause serious engine damage that will not be covered by any Volkswagen Limited Warranty. DO NOT mix any lubricants or other additives into the engine oil. Doing so can cause engine damage. Damage caused by these kinds of additives are not covered by any Volkswagen Limited Warranty. Quantities are approximate. DO NOT overfill. S
Fuel Tank FWD 18.50 GALS. 70.03 L Includes: a reserve of 2.1 gal. S
Transfer Case Fluid Bevel Box 1.00 QTS. 0.94 L Part No. G 052 145 S2. S
Windshield Washer Fluid 2.60 QTS. 2.46 L Part No. G 052 164. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.