Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Programmable Parameters
This method is used to configure parameters that may be modified. Not all features controlled by the module are listed in this configuration method. Refer to the PROGRAMMABLE PARAMETERS INDEX for a list of features by system.
If a module that has been modified using programmable parameters needs to be installed, the PMI procedure maintains the parameters in their altered state if the WDS is able to communicate with the old module during vehicle ID. Otherwise, programmable parameters may be needed to return the module to the altered state.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.